-
Cancel
Features
Dual-line display, instantaneous/ cumulative flow rates displayed at the field
Non-contact magnetic coupling transmission
With function of data recovery, data backup and power failure protection
Multiple parameters calibrating function
1.Applicable for inflammable and explosive occasion
2.Designed for measurement of small caliber and low-speed medium
3.Low requirement for the straight tube section
4.instantaneous/ cumulative flow rates displayed
Item | Specification |
Diameter | DN15,DN25,DN50,DN80,DN100,DN150 (Please contact us for other dimension) |
Range of flow | Liquid:1.0~150000l/h Gas:0.05~3000m3/h |
Measure ratio | 10:1, 20:1(special) |
Accuracy | 0.5, 1.0 (special) |
Pressure rating | DN15,DN25,DN50: 4.0MPa(Max: 20MPa) DN80,DN100,DN150:1.6MPa (DN80:Max 10MPa;DN100:Max 6.4MPa:DN150:Max 4.0MPa) |
Medium temperature | Standard:-30℃~+120℃,high temperature:120℃~350℃ |
Power supply | 24VDC(12~36VDC) |
Output signal | 4~20mADC (two-wire configuration); attached HART Protocol allowed |
Output load | 500Ω(24V power supply) |
Operating temperature | Compact type:-40℃~120℃ Remote type:-30℃~60℃ |
Storage requirement | Temperature:-40℃~85℃ humidity:≤85% |
Connection mode | Flange connecting. Flange standard: GB/T9119-2000; User’s appointment allowed |
Cable interface | M20×1.5 |
Housing ingress protection | IP65 |
Explosion-proof | Intrinsic safety type:ExiaIICT6 explosion-proof type:ExdIICT6 |
Pressure loss | See table of flow for detailed information |
Viscosity of medium | DN15:η<5mPa.s DN25:η<250mPa.s DN50~DN150:η<300mPa.s |
Contact material | R1:304,1Cr18Ni9Ti; Ro:316,0Cr18Ni12Mo2Ti; RL:316L,00Cr17Ni14Mo2Ti; Ti:Titanium alloy; Rp:PTFE lining |
Flow range
Diameter (mm) | Float type | Flow range | Pressure loss (Kpa) | ||||
Water L/h | Air m3/h | Water | Air | ||||
Normal | Anti-corrosion | Standard | Normal | Anti-corrosion | |||
15 | A | 2.5~25 | / | 0.07~0.7 | 6.5 | / | 7.1 |
B | 4.0~40 | 2.5~25 | 0.11~1.1 | 6.6 | 5.5 | 7.2 | |
C | 6.3~63 | 4.0~40 | 0.18~1.8 | 6.6 | 5.5 | 7.3 | |
D | 10~100 | 6.3~63 | 0.28~2.8 | 6.6 | 5.6 | 7.5 | |
E | 16~160 | 10~100 | 0.48~4.8 | 6.8 | 5.6 | 8.0 | |
F | 25~250 | 16~160 | 0.7~7.0 | 7.0 | 5.8 | 10.8 | |
G | 40~400 | 25~250 | 1.0~10 | 8.6 | 6.1 | 10.0 | |
H | 63~630 | 40~400 | 1.6~16.0 | 11.1 | 7.3 | 14.0 | |
25 | A | 100~1000 | 63~630 | 3~30 | 7.0 | 5.9 | 7.7 |
B | 160~1600 | 100~1000 | 4.5~45 | 8.0 | 6.0 | 8.8 | |
C | 250~2500 | 160~1600 | 7~70 | 10.8 | 6.8 | 12.0 | |
D | 400~4000 | 250~2500 | 11~110 | 15.8 | 9.2 | 19.0 | |
40 | A | 500~5000 | 300~3000 | 12~120 | 10.8 | 8.6 | 9.8 |
B | 600~6000 | 350~3500 | 16~160 | 12.6 | 10.4 | 16.5 | |
50 | A | 630~6300 | 400~4000 | 18~180 | 8.1 | 6.8 | 8.6 |
B | 1000~10000 | 630~6300 | 25~250 | 11.0 | 9.4 | 10.4 | |
C | 1600~16000 | 1000~10000 | 40~400 | 17.0 | 14.5 | 15.5 | |
80 | A | 2500~25000 | 1600~16000 | 60~600 | 8.1 | 6.9 | 12.9 |
B | 4000~40000 | 2500~25000 | 80~800 | 9.5 | 8.0 | 18.5 | |
100 | A | 6300~63000 | 4000~40000 | / | 15.0 | 8.5 | / |
150 | A | 20000~100000 | / | / | 19.2 | / | / |
