-
Cancel
Transmitter can transform the sensor signal into standard 4-20mA signal. anti-interference ability, suitable for 0-100m within the signal transmission, and more easily accepted and collected.
The main function of the junction box is to summarize the signal and adjust the angle difference.As a multi-sensor system, the output of each sensor is different, which can be adjusted by the adjustable res…
If you Want to improve the sensitivity,we have to thin the Strain beam.When the srtain beam thinner,the stiffness of the load cell is reduced.
For example 2.0±0.002mv/v. In the case of the excitation voltage is 1v, when the sensor is subjected to full-scale pressure, its two outputs will have a pressure change of 2mv.
(Output voltage at full load - output voltage at no load) / excitation voltage = sensitivity. First measure the output voltage of the load cell when the no-load condition is measured,second Increase the wei…
Dynamic torsion is a precision measuring instrument for measuring various torques, rotating speed and mechanical power. It is mainly used in motor, engine, internal combustion engine and other rotary power …
Principle: Using strain gauge electrical measurement technology to making strain bridge is formed on the elastic shaft, then the electrical signal of the elastic shaft can be measured by providing power to …
One side: A power device for measuring speed , such as a fan or high-speed rotation device. Another side: A load device for measuring torque (also called magnetic brake).
1. What is the range and speed of the torque sensor? (The speed unit=RPM=RPM/min) 2. Whether both of torque value and speed value should be measured or not? If it be confirmed,configure the transmitter o…
The power supply of GTS100 is 24V and the default output is the frequency signal. If customer needs analog output signal should be confirmed if it is electric current or voltage. The default of it is 0-5V/0…
A. In general, this product could receive the pulse signal when it connects PLC or equipment and it could be use directly. B. Customer should purchase dynamic torque sensor and transmitter if it receive the…
To be sure to confirm "What is the maximum measured value?" with customer before select the range. In general, customer will choose the large range, but actually we haven't encounter any approach or overlo…
