-
Cancel
GPT300 Series Conventional type melt pressure transmitter are ideal for the measurement of melt pressure in extrusion processes at temperatures up to 400℃. ♦The main applications are plastics extrusion and rubber,spinning systems and equipment for manmade fibers, petrochemical industries and so on.
♦Optional thermocoupleor RTD configurations are available.Electrical connection 5PIN and 6PIN option.
Petrochemical Industry; Chemical fiber textile, Non-woven; Plastic, Rubber,Extruding Equipment
How to use Melt Pressure Transducer? Click Here to know more info.
Better than ±1.0% accuracy
Standard diaphragm Inconel
TiN or TiAIN coating option
Internal 80% shunt calibration
0-35 to 0-2000 bar / 0-500 to 0-30000 psi
4~20mA,0~20mA,0~10V,0~5V outputs
Maximum diaphragm temperature up to 400℃
1/2~20 UNF, M18x1.5,M22x1.5 standard threads other types available on request
Pressure range | 0-35~2000bar (0-500~30000psi) | |
Accuracy | 1.0% FS(Default) | |
Repeatibility | 0.8 %FS | |
Out signal | Pressure transducer | Pressure Transmitter |
2.0mv/v for 5PIN 3.33mv/v for 6PIN | 4~20mA,0~20mA 0~10V,0~5V,1~5V | |
Power Supply | 10Vdc recommended 12V maximum | 24Vdc recommended 9-36Vdc |
The Max. Diaphragm Temp. | 662° F (350℃) for rigid stem | |
752° F (400℃) for flexible | ||
Temperature effect on zero | 40psi/100℃ 0.3Mpa/100℃ | |
Electrical Connection | 5PIN/ 6PIN | |
Process Connection | 1/2"-20UNF,M14*1.5,M18*1.5,M22*1.5 | |
The Max.overload pressure rating | 1.5*FSO | |
Interal shunt calibration | 80% FSO | |
Temperature sensor(optional) | E, J,K,S type or PT100 | |
